Adjusting Basic Hdtv Settings; Program Information - Vizio VL260M User Manual

VIZIO VL260M User Manual

Adjusting Basic HDTV Settings

Volume
To adjust the volume, press and hold the VOL! or VOL
control until the desired level is reached.
TV Channels
To step up or down through the available TV channels, press the CH ! or
button on the remote control once for the next or previous channel, or hold it
depressed until the desired channel is reached.
Note:
Wide
Using this feature, you can watch video content in different size modes.

Program Information

When watching a digital TV program, the On Screen Display will function as follows:
!
When a channel is selected, an information header is shown over the picture for a few seconds.
!
When you press the GUIDE button on the remote control, the information header and a short
summary of the program content, when available from the broadcaster, is displayed.
This information consists of the channel number and name, the format in which the program is broadcast
(480i SD, 480P SD, 720P HD, 1080i HD), audio channel 1/2 or 2/2 (omitted if alternate channel is not
broadcast), language, program title, program start and end time, program rating and if CC is available.
!
Press the GUIDE button one more time to close the display
Channel up and down will only operate in TV mode.
1. Press the MENU button on the remote control to bring up the OSD screen.
2. Press either the ! or
3. Press MENU to go to the next level.
"
4. Press the button scroll down to Wide and select it.
5. Press either the $ or # button to select among the modes.
6. For more information see Viewing Modes.
www.VIZIO.com
"
button to select Setup.
30
"
button on the remote
"