Chapter 1 Basic Controls And Connections; Front Panel; Side Panel Controls - Vizio VL260M User Manual

Chapter 1 Basic Controls and Connections

Front Panel

POWER 'VIZIO' LIGHT– The VIZIO name lights
white when powered on and orange when
powered off.
REMOTE CONTROL SENSOR – Point the
remote control directly at this window for the best
response to the remote signal.

Side Panel Controls

sequence, you will return to the beginning.
!
If a sub-menu is active, pressing this button will return to the
previous menu level.
!
Additionally, when the OSD is active, this button confirms the
menu function to be adjusted.
Version 5/29/2009
HEADPHONE – Connect your headphones here for personalized
listening without disturbing others.
POWER ( ) – Switch the HDTV on by pressing the button once.
Press the button again to turn the HDTV off.
MENU – This button activates the On Screen Display (OSD). If a sub-
menu is active, pressing this button will proceed to the next level.
CH !/" – Use these buttons to step up or down the TV channels.
While the OSD is active, these buttons function as up and down
controls in the OSD menus.
VOL + / - – Use these buttons to increase or decrease the speaker
volume. While the OSD is active, these buttons function as left and
right controls in the OSD menus.
INPUT (ENTER) –
!
Repeated pressing of this button steps through the input sources in
the following sequence: TV,
AV, Component, RGB, HDMI1
and HDMI2. Once you have
stepped through the entire
11
www.VIZIO.com
VIZIO VL260M User Manual