Choosing Where To Install Your Speakers - Emotiva airmotiv vaulta AVL-6.5 User Manual

Table of Contents

Advertisement

AIRMOTIV VAULTA AVL- 6.5

Choosing Where To Install Your Speakers

Your Airmotiv Vaulta AVL - 6.5 loudspeakers are designed to sound great no matter where you
install them. But, of course, room acoustics will affect how they sound and how they interact
with the rest of your system. For example, if you're installing a pair of Vaulta AVL - 6.5 speakers to
add stereo sound in a second zone or playroom, certain locations will enable them to deliver the
most balanced sound, and the best stereo experience, for most of the listeners in the room. And,
if you're installing a set of Vaulta speakers as height speakers for use with the immersive sound
system in your home theater room, the locations you choose will largely be determined by the
requirements of the immersive sound system you've chosen.
Choosing Where To Install Vaulta Speakers In An Immersive Home Theater System
If you plan to use your Airmotiv Vaulta AVL - 6.5 speakers as part of an immersive audio system
that features Dolby Atmos® or DTS-X™ then where you install them will be determined by the
requirements of the system you choose. If you have an immersive sound system, controlled by
a surround sound processor or home theater receiver, you should set the size selection for your
Vaulta AVL - 6.5 speakers to "small", and leave the crossover setting set to 80 Hz, which is the
default for most systems.
Choosing Where To Install a Stereo Pair of Vaulta Speakers
When installing a stereo pair of Vaulta speakers in a second zone or playroom, the location you
choose will depend to some extent on how you use the room. For example, if you're installing
your Vaulta speakers in your den, and your normal listening position is seated on a couch in front
of the TV... then the best location for your speakers, which will deliver the best stereo image for
listeners seated on the couch, will be in front of the couch, equidistant from it, and separated
as widely as possible. However, if there is no specific preferred listening position, then simply
positioning them as far apart as possible will give the best stereo experience to the largest
number of listeners. And, if you have a large or irregularly shaped room, you may consider
installing two pairs, to provide more complete coverage. The Vaulta AVL - 6.5 is rated at 8 Ohms.
Therefore, if your amplifier is rated to handle 4 Ohm speakers, you can safely connect a pair of
Vaulta speakers, wired in parallel, to the speaker output of each channel.
The bass response of the Airmotiv Vaulta AVL - 6.5 extends to below 70 Hz, which blends smoothly
with most subwoofers. However, if you plan to use them without a sub, you can increase their bass
output by mounting them close to a corner of your ceiling.
A Few Words On Wall Installations
While we consider the Airmotiv Vaulta AVL - 6.5 to be an in-ceiling speaker, they can safely operate
at any angle, and there is no specific restriction against mounting them in an angled ceiling,
or even in a wall. Note, however, that the fully enclosed walls in most modern homes DO NOT
provide sufficient depth clearance for the AVL - 6.5.
Dolby, Dolby Atmos, Dolby Vision, and the double-D symbol are trademarks of Dolby Laboratories. Copyright © 2018 Dolby
Laboratories. All rights reserved.
DTS, the Symbol, DTS and the Symbol together, DTS:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc in
the United States and/or other countries. ©DTS, Inc. All Rights Reserved.
Page 8

Advertisement

Table of Contents
loading

Table of Contents