Advertisement
Interface
Factory Reset
WAN(SFP)
WAN1~WAN2
LAN1~LAN4
USB1~USB2
PWR
ON/OFF
Note 1
Vigor router will use either Fiber WAN or WAN1 for Internet connection.
If both Fiber WAN and WAN1 are connected at the same time, Fiber WAN
will be the first choice.
Note 2
The PoE Power budget is up to 60W.
Description
Restore the default settings.
Usage: Turn on the router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the ACT LED begins to
blink rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
Fiber connector for accessing the Internet.
Connector for remote networked devices.
Connectors for local networked devices.
Such connectors support PoE device with up to 30 watt power which
is compliant with IEEE 802.3at standard.
Connector for a USB device (for 3G/4G USB Modem or printer).
Connector for a power cord.
Power Switch.
5
Advertisement
