Chapter 2 Basic Controls And Connections; Front Panel - Vizio M190MV User Manual

VlZIOM190MV/M220MV UserManual
Chapter 2 Basic Controls and Connections
Front Panel
POWER 'VIZIO' LIGHT--The VIZIO logo lights white
when powered on.
Your HDTV TV features touch-sensitive buttons that
light when active. The proximity sensor detects you,
and as your hand gets closer to the surface, the
intensity of the LEDs increase.
Remote Control Sensor--Point the remote control
directly at this window on the lower left corner of your
HDTV for the best response to the remote signal.
1. POWER ( _ )--Turn your HDTV on by pressing
the button once. Press the button again to turn your
HDTV off.
2. MENU--Press to launch the on-screen menu. If a
sub-menu is active, this button will proceed to the next
level.
3. CH A/VmPress to change the channels up or
down. While the menu is active, these buttons function
as up and down controls.
4. VOL A/T--Press to increase or decrease the speaker volume. While the menu is active,
these buttons function as left and right controls.
5. INPUT (SELECT)--Press to cycle through the various devices connected to your TV (called
Inputs). The inputs cycle in the following sequence: TV, AV (Composite), COMP (Component),
HDMI-1, HDMI-2, and RGB (VGA). After you have stepped through the entire sequence, you will
return to the beginning. If a sub-menu is active, pressing this button will return to the previous
menu level. Additionally, when the menu is active, this button confirms the menu function to be
adjusted.
10
www.VlZlO.com