2.4ghz digital
wireless peephole viewer (16 pages)
Summary of Contents for Locksys LSIA820
Page 1
Wireless Audio Doorphone User Manual Thank you for choosing our product of Wireless Audio Door phone (Wireless Gate Pass). An upgrade on the traditional doorbell, the p ro d u c t is a wireless intercom doorphone specially designed for modern household and office use. This product enables you to communicate freely and conveniently, as well as giving you the convenience of both safely and remotely operating automated gates or electric locks, without the troubles and costs of running cables indoor.
INSTALLATION A. Handset Open the cover of batteries compartment on the back of Handset. Connect the supplied batteries to the Handset. Check to ensure that the LED light on the Handset is flashing. If not, press and hold the Open Gate Button for 3 seconds, and one of the LED lights will come on and start flashing.
Page 4
Step5: Switch on the power (must be AC/DC 9~24V and the output electric current more than 200mAh) to Base. Make a call from Gate Station and talk with a Handset to test the sound volume of Gate Station. If the volume of talking sound is too loud or small, turn the Volume Knob in Base to adjust the volume of talking.
Page 5
Please Note: The extent time of Base opening a gate or lock could be choice 1.3 seconds or 5 seconds. Push the Extent Switch in Base can change the extent time. Switch down the extent time to open gate or lock is 1.3 seconds which is usually suitable for automatic sliding gate.
more than 3 seconds will activates handset coding mode (see HANDSET CODING ). If this happened in case, push the answer button for exiting coding mode. OPERATION Handset – Open Gate/Lock Remotely: Press and hold the Open Gate button on any Handset (about 3 seconds) until the Handset makes beeping sound.
Page 7
standby time is experienced, replace the battery. Handset Lights not Flashing: Upon initial usage, or after you have changed the batteries in a handset, the LED indicator lights may not be flashing. If this happens, press and hold down the Open Gate button for 3 seconds, until the indicator LED lights start flashing again.