Subscribe to Our Youtube Channel
Related Manuals for HomeSpot HS3 NS002
Summary of Contents for HomeSpot HS3 NS002
- Page 1 NSwitch The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks ® by HomeSpot ® is under license. Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries.
-
Page 2: Package Contents
Package Contents HomeSpot HS3 NS002 User Guide USB-C to USB-A Adapter Pouch Warranty Card... - Page 3 About your HomeSpot HS3 NS002 P1 Button Press to Connect or Toggle Internal Mic / Hold to Pair P1 LED Green = Connected with Mic Off Amber = Connected with Mic On Flashing Green = Connecting or Pairing Codec LED...
-
Page 4: Setting Up Your Hardware
2. Insert the HomeSpot HS3 NS002 into the NSwitch USB-C port. 3. LED indictors on the HomeSpot HS3 NS002 will start flashing. 4. HomeSpot HS3 NS002 is ready for pairing and connecting with your headphones once the LEDs have stop flashing. - Page 5 2. Make sure the Bluetooth headphones is in pairing mode. 3. Keep the headphones close to the HS3 NS002 during initial pairing. 4. Once connected, P1/P2 LED will be Green and headphones will start receiving audio from the NSwitch.
- Page 6 2. Pair the 2nd headphones by pressing the P2 button for 3 seconds. 3. Keep the 2nd headphones close to the HS3 NS002 during initial pairing. 4. Once both headphones are connected, both P1 and P2 LEDs will be Green.
-
Page 7: Factory Reset
Reconnecting to a previously paired headphones . Automatic re-connect When a previously paired headphones is turned on, it will automatically re-connect to the HomeSpot HS3 NS002. . Manual re-connect You may also manually initiate a re-connect by pressing either the P1 or P2 button, the corresponding previously paired 1st or 2nd headphones will be re-connected respectively. - Page 8 TV Mode * For regular NSwitch only The HomeSpot HS3 NS002 can also be used with the TV dock. Simply plug the bundled USB-C to USB-A adapter to the USB-A port on the side of the TV dock, then insert the HS3 NS002 into USB-C port on the adapter.
-
Page 9: Led Indicators
LED Indicators LEDs Status P1 Codec P2 Powering up LEDs flashing from left to right Off / Standby All LEDs Off P1 Pairing P1 & Codec LEDs flashing alternately P1 Connecting P1 LED flashing P2 Pairing P2 & Codec LEDs flashing alternately P2 Connecting P2 LED flashing P1 Connected and Internal Mic Off... -
Page 10: Product Specifications
Product Specifications Bluetooth version Bluetooth 5.0 Operating Frequency 2402 – 2408MHz Supported Bluetooth Profiles AD2P, HFP Supported Codecs aptX Low Latency, aptX, SBC Operating Range Up to 10 meters line of sight Operating Temperature Range 0˚C to 45˚C Safety Instructions .
Need help?
Do you have a question about the HS3 NS002 and is the answer not in the manual?
Questions and answers