Attaching The Tv Stand - Vizio E322VL User Manual

Attaching the TV Stand

Note: We strongly recommend that two people perform the setup and assembly due to the weight and
size of the TV.
Unpack the TV and stand base:
1. Remove the remote control, batteries, and power cord from the foam end caps.
2. Remove the two top foam end cas.
3. Remove the stand base under foam end cap.
4. Remove the TV from the box and lay it face down on a clean, flat surface.
Note: Make sure that the surface is free of debris to prevent the TV screen from getting scratched.
Attach the TV stand base:
1. Push the stand base onto the stand neck (already connected to TV).
2. On the bottom of the base, insert the thumb screw and tighten. Move the TV into an upright
position.
Bottom view
Version 5/25/2010
Stand Neck
(already attached
to TV)
Stand Base
11
www.VIZIO.com
VIZIO E322VL User Manual
Vizio TV
(back)