Operation - auna Areal Bar 150 Manual

Connection Terminal
1 AUX 2
2 USB
3 AUX 1
4 TF CARD
5 DC IN
• Turn on the sound bar and then switch to Bluetooth Mode, the Bluetooth icon on the LED display will
keep flashing;
• Keep the sound bar and Bluetooth enabled device within 20~30 feet or less of each other during pa-
ring process. Different environments may affect the transmission distance;
• Set your mobile phone or the Bluetooth enabled device to search for Bluetooth devices;
• When the Bluetooth enabled finds the sound bar, select "Areal Bar 150" from the list of found devices;
• If required, enter the password "0000". Select OK or YES to pair the two units;
• After a successful pairing, the Bluetooth Indicator light will stop blinking.
AUX 1:
Keep the unit powered on. Plug one end of the 3.5 mm AUX cord to the headphone jack on your device.
Plug the other end of the 3.5 mm AUX cord into the AUX1 jack on the sound bar. It successfully joins into the
AUX Mode along with AUX1 icon lights up. Use the connected device's audio controls for music playback.
10
Use the supplied AUX-RCA cable to connect external devices (TV, DVD, etc) here.
Connect USB drives containing MP3 files here; use to charge mobile phones (5V)
Use the supplied audio cable to connect external media players here.
SD slot

Operation

AUX1 and AUX2 Mode
BT