Troubleshooting - LG MUSIC flow H4 Simple Manual

2. If you change the location of the speaker that is in use,
2-1. If the changed location is too far from the home router,
2-2. Connect the speaker with a LAN cable, and for
There are times that speaker disappears from
the application
1. If the speaker blinking lamp is not blinking, and stays
as white: Even after the speaker power off and on, if the
problem continues, in this case you have to reset the speaker
(To reset, press and hold the
until you hear one beep.) and need to register again. Carry
out speaker installation or additional procedures.
2. If the speaker blinking lamp blinks white - network signal is
unstable. Wait for a while, or move the speaker to another
location closer to other speaker or router.
3. Press menu key or menu at the top right side of Home
screen to end Music Flow Player app and run again.
Music sound breaks and unstable MUSICflow
system
1. If speaker with breaking sound is connected through
wireless connection mode,
y If the distance between speaker and home router is not
P8350B-M0.BCANLLA_SIM_MFL69154863_ENG.indd 23
it may not be connected. Place and use it at a location
that is close enough to router.
additionally installed speakers, if they are not close
enough to the speaker connected with a LAN cable,
additionally install Bridge or another speaker in the
middle location between the speaker connected
with LAN cable and the speaker with sound being
disconnected.
close enough, the corresponding condition may occur.
Move speaker closer to home router and try again.

Troubleshooting

(ADD) button for 8 seconds
23
4
2015-07-27 4:24:01