Installation Instructions; Power - HANNspree HANNS-G HQ271 User Manual

User's Manual

INSTALLATION INSTRUCTIONS

INSTALL REMOVE
Figure.1. Installing and Removing the Base
INSTALLATION:
1. Align the monitor with the opening in the base.
2. Note that the longer section of the base points forward.
3. Snap the monitor into its base. Using the screw to load
4. Verify that the monitor is securely attached to the base by looking at the bottom of the base and
making sure that the clips are fully engaged in the base.
REMOVAL:
1. Flip over the monitor so that it is upside down.
2. Unscrew the screw that holds the monitor in place.
3. Gently pull the base from the monitor until they are unattached.

POWER

POWER SOURCE:
1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has adaptor that allows operation in DC 19V 2.63A
3. Connect the DC-power cord one end to your LCD monitor's DC-input socket, the other end to
wall-outlet.
8