Download
Share
Print this page
V2 LEX-RFO Manual
  1. Manuals
  2. Brands
  3. V2 Manuals
  4. Engine
  5. LEX-RFO
  6. Manual
V2 LEX-RFO Manual

V2 LEX-RFO Manual

Tubular motor for shutters with adjustable louver blades (built-in control unit)
Hide thumbs

Advertisement

Quick Links

Download this manual
Value moves the world
LEX-RFO
I
MOTORE TUBOLARE PER
TAPPARELLE CON LAMELLE
ORIENTABILI (CENTRALE DI
COMANDO INTEGRATA)
GB
TUBULAR MOTOR FOR SHUTTERS
WITH ADJUSTABLE LOUVER
BLADES (BUILT-IN CONTROL UNIT)
F
MOTORÉDUCTEUR TUBULAIRE
POUR VOLETS PERSIENNÉS DE
LAMES ORIENTABLES (ARMOIRE
DE COMMANDE INTEGREE)
E
ROHRMOTOR FÜR ROLLLÄDEN
MIT SCHWENKBAREN LAMELLEN
(INTEGRIERTEM STEUERUNG)
D
MOTORREDUCTOR TUBULAR
PARA PERSIANAS DE LAMAS
ORIENTABLES (CUADRO DE
MANIOBRAS INTEGRADO)
NL
BUISMOTOR VOOR ROLLUIKEN
MET VERSTELBARE PLATEN
(INGEBOUWDE STURING)
IL 386
EDIZ. 08/05/2017

Advertisement

loading
Need help?

Need help?

Do you have a question about the LEX-RFO and is the answer not in the manual?

Questions and answers

Related Manuals for V2 LEX-RFO

Summary of Contents for V2 LEX-RFO

  • Page 1 Value moves the world IL 386 EDIZ. 08/05/2017 LEX-RFO MOTORE TUBOLARE PER ROHRMOTOR FÜR ROLLLÄDEN TAPPARELLE CON LAMELLE MIT SCHWENKBAREN LAMELLEN ORIENTABILI (CENTRALE DI (INTEGRIERTEM STEUERUNG) COMANDO INTEGRATA) TUBULAR MOTOR FOR SHUTTERS MOTORREDUCTOR TUBULAR WITH ADJUSTABLE LOUVER PARA PERSIANAS DE LAMAS...
  • Page 2 Modello carico* coppia velocità alimentazione potenza tempo di lunghezza funzionamento Model load* torque speed power supply power working time length V/Hz min. LEX-RFO40-230V 230/50 LEX-RFE50-230V 230/50 Fig. 1 code Per motori con coppia fino a 30 Nm 162728 For motors with torque up to Pour moteurs avec couple jusqu’à...
  • Page 3 Fig. 2 Fig. 3 - 3 -...
  • Page 4 230V MODELS METEO / HURRICANE White Blue Brown Black Yellow / Green WIND / MISTRAL White Blue Brown Black Yellow / Green COLLEGAMENTI CONNECTIONS BRANCHEMENTS BIANCO - NON UTILIZZATO WHITE - NOT USED BLANC - NON UTILISÉ BLU - Neutro BLUE - Neutral BLEU - neutre MARRONE - Fase...

  • Page 5: Important Remarks

    The relevant technical documentation is available at the national authorities’ request after justifiable request to: • Keeps remote controls away from children V2 S.p.A., Corso Principi di Piemonte 65, • Frequently examine the installation for imbalance and sings of 12035, Racconigi (CN), Italy wear or damage to cables and springs •...

  • Page 6: Installation

    TRANSMITTERS OF THE RANGE INSTALLATION • Fix the stirrup G to the wall. PROTEO / DUO • Insert the crown A in the driving wheel B of the limit switch (fig.1). Using a transmitter of the range PROTEO / DUO it is possible •...
  • Page 7 SWITCH 2: STORAGE OF THE TRANSMITTERS SWITCH 3: DELETION OF ALL THE STORED TRANSMITTERS WARNING: the first transmitter stored fixes the direction of motion of the motor. To delete all the transmitters stored on the control unit it is necessary using a remote control previously stored and To store a transmitter TX1 on a blank control unit proceed proceed as follows: as follows:...
  • Page 8 SWITCH 4: PROGRAMMING OF OPENING SWITCH 5: PROGRAMMING OF CLOSING LIMIT SWITCH OF THE ROLLING SHUTTER LIMIT SWITCH OF ROLLING SHUTTER (LOUVER BLADES) To set the opening limit switch on a rolling shutter with a blockage at the top, you must have a previously stored NOTE: you must have a previously stored remote control remote control available and must proceed with the available and must proceed with the following points.
  • Page 9 ARTEMIS SERIES TRANSMITTERS FAST PROGRAMMING Using a transmitter of the ARTEMIS series you can change the RAPID TRANSMITTER DATA STORAGE functions of the control unit that drives the tubular motor. CAUTION: The data storage of the first transmitter determines the direction of motion of the motor. CAUTION: If the awning has a casing carry out the data storage of the first remote control by following the procedure “TRANSMITTER DATA STORAGE”...

  • Page 10: Advanced Programming

    ADVANCED PROGRAMMING 7. To exit the programming mode press the STOP key 8. Try to operate the roll-up shutter and verify that it works according to the logic described above. If the logic is reversed To perform ADVANCED programming it is necessary to activate it is necessary to delete all the codes stored (see “DELETION the programming by following one of the following procedures.
  • Page 11 PROGRAMMING OF OPENING LIMIT SWITCH PROGRAMMING OF CLOSING LIMIT SWITCH OF THE ROLLING SHUTTER OF ROLLING SHUTTER (CLOSED LOUVER BLADES) To set the opening limit switch on a rolling shutter with a blockage at the top, you must have a previously stored NOTE: you must have a previously stored transmitter transmitter available and must proceed with the following available and must proceed with the following points...
  • Page 12 TRANSMITTERS OF THE RANGE ADVANCED PROGRAMMING ADLER To perform ADVANCED programming it is necessary to remove the cover plate of the remote control and carefully follow the dedicated procedures for the various functions. Using a transmitter of the range ADLER it is possible changing the functions of the control unit controlling the tubular motor.
  • Page 13 STORAGE OF THE TRANSMITTERS DELETION OF ALL THE STORED TRANSMITTERS WARNING: the first transmitter stored fixes the direction of motion of the motor. To delete all the transmitters stored on the control unit it is necessary using a remote control previously stored and To store a transmitter TX1 on a blank control unit proceed proceed as follows: as follows:...
  • Page 14 PROGRAMMING OF OPENING LIMIT SWITCH PROGRAMMING OF CLOSING LIMIT SWITCH OF THE ROLLING SHUTTER OF ROLLING SHUTTER (CLOSED LOUVER BLADES) To set the opening limit switch on a rolling shutter with a blockage at the top, you must have a previously stored NOTE: you must have a previously stored transmitter transmitter available and must proceed with the following available and must proceed with the following points...