1. Remove front castor assembly, refer to 6.8.4 Replacing
Forks and/or Castor Assemblies, page 27.
2. Remove drive wheel, refer to 6.9.6 Replacing Drive
Wheel (1-Bolt Installation), page 32.
3. Remove top shroud, refer to 6.10.1 Replacing Top
Shroud, page 36.
4. Remove front shroud, refer to 6.10.2 Replacing Front
Shroud, page 36.
5. Remove four screws (1) that secure swingarm (4)
assembly to motor.
6. Remove locknut (2) and spacer (3) that secure
swingarm (4) assembly and bracket (8) to frame (9).
7. Install parts in reverse order.
8. Test all functions.
6.8.3 Replacing Spring
1. Unhook spring (1) from hooks (2) on frame (3) and
bracket (4).
2. Install spring (1) to hooks (2) on frame (3) and bracket
(4).
3. Test all functions.
6.8.4 Replacing Forks and/or Castor Assemblies
Front and rear forks are replaced in the same manner.
•
Ratchet with 15/16 inch socket
1568396-C
Fig. 6-6
Fig. 6-7
Service
27