Advertisement
DVF-5020
2-7 Disassembling the Traverse Unit
1. Remove the 3 screws.
Note
Be sure to take static electricitiy countermeasures befer
disconnecting the flexible cable.(Refer to page7/2-4 Stat-
ic Electricity Countermeasures.)
2. Disconnect the 2 flexible cables.
8
DISASSEMBLY FOR REPAIR
2-8 Disassembling the Stepping Motor Unit
1. Disconnect the flexible cable.
2. Remove the 2 screws.
Note
Take care when handling the flexible cable because it
can be broken by excessive force.
2-9 Disassembling the Optical Pickup Unit
1. Remove the hook of the FPC holder, then remove the
FPC holder itself.
2. Remove the screw.
3. Release the tab, then remove spring holder 1.
Note
Be sure not to lose the spring.
4. Remove the guide shaft.
Note
Be sure to adjust the optical pickup tilt after replacing the
optical pickup.
(Refer to page10/2-14 Opitcal Pickup Tilt Adjustment.)
Advertisement
