Setup Menu - Nice LN-5000 UL3 BT Instructions And Warnings For Installation And Use

3.2- SETUP MENU

To access the setup menu, after the Biometric Lock activation, press the enter key "
for 5 seconds.
The "Admin Code" message will be displayed. Type the admin password + enter key.
The "Menu" message will be displayed. Press the corresponding desired setting number:
1- Add User
3- Passage Mode
5-
7- Add Admin
1- Add User:
Selecting the option 1 the message "Add User" will be displayed.
Press the enter key "
The message "Enter user ID" will be displayed. Type a number to be the user's ID. Press
the enter key again.
The message "Finger or code" will be displayed, and in this case will be necessary to
choose registering a fingerprint or a password registration for this user. If choose the
password registration, type it on the keypad following the item "3.3 - Password"
recommendation.
If choose the fingerprint registration, place a finger on the biometric reader following the
item "3.4 – Fingerprint" recommendation.
---
" to confirm.
After typing the password on the keypad, the message "Enter
again" will be displayed. Type it again, and to save the register
press the enter key again.
After placing the fingerprint on the biometric reader, the "Place
again" message will be displayed, then place the same finger on
the reader.
The message "Success" will be displayed after the registration
finishing, in both the options.
2- Delete User
4- Lockout Mode
6- ---
8- Clear Admin
"
Português -
English - 55 55