Altinex Signal Management Solutions PNP515 Series User Manual

PNP515 PNP515
PNP515 PNP515
Series Series Series Series
Welcome!
We greatly appreciate your purchase of the PNP515/517/527/537/547
Customizable Pop 'N Plug (PNP) with Custom Tabletop Surface. We are sure
you will find it reliable and simple to use. Superior performance for the right
price, backed by solid technical and customer support is what ALTINEX has to
offer.
We are committed to providing our customers with Signal Management
®
Solutions to the most demanding audiovisual installations at competitive
pricing and we welcome you to join the ranks of our many satisfied customers
throughout the world.
1. Precautions and Safety Warnings
Please read this manual carefully before using your PNP Interconnect Box.
Keep this manual handy for future reference. These safety instructions are to
ensure the long life of your PNP and to prevent fire and shock hazards. Please
read them carefully and heed all warnings.
1.1 General
•
Qualified ALTINEX service personnel or their authorized representatives
must perform all service.
•
Unauthorized personnel shall not open the unit since there are
high-voltage components inside
1.2 Installation Precautions
•
For best results, place the PNP in a dry area away from dust and
moisture.
•
To prevent fire or shock, do not expose this unit to water or moisture.
Do not place the PNP in direct sunlight, near heaters or heat-radiating
appliances, or near any liquid. Exposure to direct sunlight, smoke, or
steam can harm internal components.
•
Handle the unit carefully. Dropping or jarring can cause damage.
•
Never place fingers inside the openings of the unit. This action could
cause serious injury due to sharp edges inside the unit.
•
Do not place heavy objects on top of the PNP. Do not use excessive force
to push down on the top of the unit.
2. Installation Procedures
Step 1. Refer to the ALTINEX website, www.altinex.com, to download the latest templates and instructions for tabletop cutting requirements and installation
instructions.
In order to do this, locate the PNP on the website and go to its detail page. The links to the templates, user's guide, and more are on the left hand side
of the screen.
Step 2. Print all information applicable to the installation of the PNP, including the templates and any detailed installation instructions.
Step 3. Cut an opening into the table's surface. The cutout is the top of the PNP, so it must be cleanly cut and saved. This operation should be performed by
experienced professionals in order to insure accuracy and to be aesthetically pleasing.
Note: Always confirm dimensions before cutting to insure that specifications have not changed.
Step 4. Install the PNP into the table per the installation instructions provided on the website.
Step 5. Connect all cables to their appropriate sources and/or destinations. The PNP is now ready for operation.
3. Limited Warranty/Return Policies
Please see the ALTINEX website at
400-0464-005
Customizable Pop 'N Plug Customizable Pop Customizable Pop Customizable Pop 'N Plug 'N Plug 'N Plug
www.altinex.com for details on warranty and return policies.
®
with Custom Tabletop with Custom Tabletop with Custom Tabletop with Custom Tabletop
•
To turn off the main power, disconnect the power cord. The power
outlet should be near the equipment and easily accessible.
•
ALTINEX recommends using wall outlets with a Ground Fault Circuit
Interrupter (GFCI) for maximum protection.
•
Install all cables according to the instructions. Do not force or pull any
cable or power cord attached to the PNP.
1.3 Cleaning
•
Surfaces should be cleaned with a dry cloth. Never use strong detergents
or solvents such as alcohol or thinner. Do not use a wet cloth or water to
clean the unit.
1.4 FCC Notice
•
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
•
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions found herein, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
•
Any changes or modifications to the unit not expressly approved by
ALTINEX, Inc. could void the user's authority to operate the equipment.
1
User's Guide
Surface Surface Surface Surface