Docking Station - AmazonBasics B07PWY8D87 Manual

Notebook arm mount tray

Table of Contents

•

Step B: Loosen the adjustment knobs underneath the notebook tray to adjust the

•

Step C: See "Step 4: Adjust your arm's tension" on page 8 to adjust your

Docking station

•

Step A: Cut the non-slip pads in half, remove the backing, then place them on the

•

Step B: Remove the backing from the three adhesive strips on the notebook tray,

length of the notebook tray legs, and place notebook on the tray. Then

tighten to secure. Your notebook should fit snugly against the notebook

tray legs.

notebook arm's tension.

notebook tray (as shown).

then firmly press your docking station onto the strips. The back of the

docking station should be flush with the back of the notebook tray.

Table of Contents

Do you have a question about the B07PWY8D87 and is the answer not in the manual?