Capturing Images; Power On The Camera - Vivitar Vivicam 3350B User Manual

4.0 Capturing Images -

Using your new Vivicam 3350B is fun and easy. There are two basic steps
to capturing your first image.
Step 1: Turn on the camera by pressing
and hold the Power Button for 2 second.
Step 2: Press the shutter button to capture
an image.
It is really that easy! The following sections
will tell you about more features that are available on your camera.

4.1 Power On the Camera -

To power on the camera press and hold the Power/Menu button for 2
second as shown above. The camera will beep once, indicating that it is
ready. The Information/Status display will turn on like this:
In this example the camera is ready to capture image in Hi
resolution mode. (Display icons are explained in section
4.3.)
Note that the camera will automatically power-off after 30 seconds to save
battery power. To turn the camera on again, press the Power button.
-11-