Siemens SCALANCE W778-1 Operating Instructions Manual page 64

Industrial wireless lan for simatic net
Hide thumbs Also See for SCALANCE W778-1:
Table of Contents

Advertisement

Approvals
The application of low power frequency electric machineries shall not affect the
navigation safety nor interfere a legal communication, if an interference is found, the
service will be suspended until improvement is made and the interference no longer
exists.
The said legal communications means radio communications is operated in compliance
with the Telecommunications Act. The low power radio-frequency devices must be
susceptible with the interference from legal communications or ISM radio wave radiated
devices. The operations near the radar system shall not be influenced. The directed
antenna with high gain (>6dBi) must apply to the fixed point-to-point system only.
WLAN 2.4GHz
"MPE standard value is 1.0 mW/cm
Measured value is 0.1848 mW/cm
WLAN 5GHz
"MPE standard value is 1.0 mW/cm
Measured value is 0.0287 mW/cm
Professional installation
Installation and change of RF parameters must be done only by trained professional
installers who ensure that the correct power and country settings are selected.
Untrained personal shall not have access to the admin password in order to change
these parameters.
64
2
"
2
2
"
2
Operating Instructions, 07/2020, C79000-G8976-C450-06
SCALANCE W778-1 /W738-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scalance w738-1

Table of Contents