Electrical Safety - Baumr-AG CHNSHPBMRA02K User Manual

Chainsaw Sharpener

Electrical Safety


Long and thin connection lines will result in a potential drop.

Plugs and coupler outlets on connection cables must be made of rubber, non-rigid PVC or
other thermoplastic material of the same mechanical stability.

The connector of the connection cable must be splash-proof.

When running the connection line, make sure it is neither bent nor stretched.

Never run the sharpener with a wet plug connection.

Wind the cable completely when using a cable drum.

Only use the cable as it was intended.

Protect the cable against heat, oil and sharp edges.

Do not use the cable to pull the plug from the socket.

Protect yourself against electric shocks. Avoid touching earthed parts (e.g. pipes, heating
apparatus, cooker, fridges etc.).

Regularly check the extension cables and replace them if they are damaged.

Do not use any defective connection cables.

Do not set up any provisional electrical connections.

Never bypass protective devices or deactivate them.
The electrical connection or repairs to electrical parts of the machine must be carried out by a
certified electrician or by a representative of the manufacturer.
Use only original spare parts, accessories and special accessory parts. Accidents can arise for
the user through the use of other spare parts. The manufacturer is not liable for any damage or
injury resulting from such action.