Connectivity
Using a Wi-Fi network
The Element can use the Wi-Fi network to access to the Internet or run
applications that need Internet connection.
Connecting to a Wi-Fi network
Settings
> Wi-Fi.
1. Tap
>
2. Tap
OFF
next to
Wi-Fi
to activate.
3. Select and tap a network. You should enter the password if the
network is secured.
indicates a secured Wi-Fi network.
4. Tap Connect. Once the network is remembered, the Element will
automatically connect to it when in range.
Disconnecting to a Wi-Fi network
1. Tap
>
Settings
> Wi-Fi.
2. Tap the Wi-Fi network that is connected to the Element.
3. Tap
Forget
to disconnect with the network.
Note You can also disconnect the Wi-Fi network easily in the home screen. Tap
the status bar on the bottom of the screen and adjust the settings.
Setting Wi-Fi networks
Settings
> Wi-Fi.
1. Tap
>
2. Tap
OFF
next to
Wi-Fi
to activate.
3. Tap
> Advanced.
4. Adjust the following options:
Network notification
Tap
x
network is available. It is selected by default. The icon
status bar indicates a network is available.
if you want to be informed when a Wi-Fi
in the
Tap
Keep Wi-Fi on during sleep
x
to connect to the Wi-Fi network.
Wi-Fi Signal Filter
Tap
x
network.
Setting WPS connection
Settings
> Wi-Fi.
1. Tap
>
2. Tap
>
WPS
connection.
3. Adjust the following options:
Tap
Button
connection. Ensure that you press the WPS button on
x
your Wi-Fi access point within two minutes.
Pin
connection. Ensure that you enter the PIN at your Wi-Fi
Tap
x
access point within two minutes.
Searching for Wi-Fi networks
Settings
> Wi-Fi.
1. Tap
>
2. Tap
OFF
next to
Wi-Fi
to activate. The Element scans networks
automatically every six seconds. The newly found networks appear
on the bottom of the list. If you want to find Wi-Fi networks manually
available around you, tap
Adding a Wi-Fi network
1. Tap
>
Settings
> Wi-Fi.
OFF
Wi-Fi
2. Tap
next to
to activate.
ADD NETWORK
3. Tap
on the top right side of the screen.
4. Enter Network SSID, and select the security type among None, WEP,
WPA/WPA2 PSK
802.1x
and
password for the network.
5. Tap Save.
21
and tap the policy about the time
and select the filter option for Wi-Fi
ADD NETWORK
or tap SCAN.
EAP. Aside from Open, you must enter a
Need help?
Do you have a question about the Element and is the answer not in the manual?