Commodore 1526 Service Manual page 38

MECHANICAL DISASSEMBLY (Continued)
8. To remove printer drive belt:
8. 1
Position the carriage at the center of the
unit to allow access through the base
to the belt holder screw. Remove the
screw and bracket.
8.2 Remove the "F" clip to release the belt
gear assembly on the right.
8.3
The drive belt will be released from the
gear assembly on the left and can be
removed
'
9. To remove the sprocket frames and tractor assembly:
9.1
The left sprocket frame is
detached by removing the
2 frame screws.
9.2 To remove the
right
sprocket frame assembly,
remove the 2 frame screws.
9.3
Remove the "F" clips to
release the tractor assem
bly from the sprocket
frames.
9.3
92
9.1