Technical Data - Bosch GCL100-40G Operating/Safety Instructions Manual

Model Number
Article number
A)
Working range
– Visible laser line
– Laser lines with optional laser receiver
– Laser points
Leveling accuracy
Laser lines
Laser points
Self-leveling range (typical)
Leveling duration (typical)
Operating temperature
Storage temperature
Max. altitude
Relative air humidity, max.
Pollution degree according IEC 61010-1
Laser class
Laser lines
– Laser type
– C
6
– Divergence
Laser points
– Laser type
– C
6
– Divergence
Compatible laser receiver
Tripod mount
Batteries
Weight
Dimensions
– Without holder
– With rotating mount RM 10
Protection rating
A) The working range may be reduced by unfavourable environmental conditions (e.g. direct sunlight).
B) At 20–25 °C
C) The values stated presuppose normal to favourable environmental conditions (e.g. no vibration, no fog, no
smoke, no direct sunlight). Extreme fluctuations in temperature can cause deviations in accuracy.
D) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by condensation is
expected.
E) Excludes battery compartment.
The serial number (10) on the type plate is used to clearly identify your measuring tool.

Technical Data

B) C)
E)
GCL100-40G
3 601 K66 M10
100 ft (30 m)
15 - 165 ft (5-50 m)
50 ft (15 m)
±1/8 in. at 30 ft (±0.3 mm/m)
±9/32 in. at 30 ft (±0.7 mm/m)
±4°
<4s
14˚F ~ 113 ˚F (-10˚C ~ +45 ˚C)
-4˚F ~ 158 ˚F (-20˚C ~ +70 ˚C)
6560 ft (2000 m)
90 %
D)
2
2
500–540 nm, < 10 mW
10
50 x 10 mrad (full angle)
500–540 nm, < 1 mW
1
0.8 mrad (full angle)
LR8
1/4"-20
4 x 1.5V LR6 (AA)
1.28 lb (0.58 kg)
5" x 2.5" x 4.5" (126 x 63 x 115 mm)
5.7" x 2.5" x 7.1" (145 x 63 x 180 mm)
IP 64 (dust tight and splash water
protected)
-11-