Remington PG9100 Manual page 6

ENGLISH
• If hair builds up in the trimmer comb during the trimmer process, switch the unit off,
pull the comb and brush the hair off.
FINE DETAILING AND EDGING
1. Fit the micro detail blade.
2. Hold the device with the cutting blade (teeth) facing you and at 90 degrees to the skin.
3. Start with the blades resting lightly against your skin, use motions towards edge of
beard line to trim to desired locations in facial area.
4. Shape as desired.
CONTOUR EDGING AND CLOSE HAIR CUTTING
Contour edging:
1. Hold the device with the cutting blade (teeth) facing you and at 90 degrees to the skin.
2. Start with the edge of the beard/moustache line and, with the blade resting lightly
against the skin, use slow controlled movements to create contoured lines.
Close hair cutting:
1. Use the fingers of one hand to lift the hair at the base of your head up off your neck.
2. Your index finger should be covering the roots of the hairs you are lifting to prevent
them from being accidentally cut.
3. Hold the trimmer to the base of your neck with the blade facing up. Move the trimmer
up the neck until it touches your index finger which is protecting the hair roots.
4. Move your trimmer slowly and keep the hair roots at the base of your head out of the
way of the trimmer.
BODY HAIR MAINTENANCE
Trimming to length
1. Select the desired comb.
2. Place the flat side of the attachment against the skin.
3. Slowly slide the trimmer through the hair in the direction of hair growth.
4. Use slow, well-controlled movements.
Removal
1. Remove the comb and go over the areas where you want to remove the body hair.
2. Stretch the skin with your free hand to make the hairs stand upright.
3. Use light pressure and shave against the direction of hair growth.
HAIR CLIPPING
Step 1: Nape of the neck
1. Attach the 3mm or 6mm fixed comb.
2. Hold the trimmer with the blade teeth pointing upwards. Start at the centre of the
head at the base of the neck.
3. Slowly lift the trimmer, working upwards and outwards through the hair trimming just
a little at a time.
6