Advertisement
Care / maintenance / storage
DANGER– risk of fatal electric shock
• Remove the mains adapter from the
wall socket before cleaning the device.
• The device must not be exposed to
moisture. It must also be protected
against drops and splashes of water.
WARNING – risk of injury
• Before cleaning, slide the rotation
direction switch into the central
position to lock the On/Off switch.
Cleaning
CAUTION – material damage
• Do not use any cleaning or solvent-
based products as these could corrode
the plastic parts.
Clean the device as soon as possible after each
use. In particular, keep the air slots and switches
free from dust and dirt.
Wipe off dust and similar dirt particles with a
dry cloth or use compressed air at a low pres-
sure.
Clean the device regularly with a damp cloth
and some soft soap. Ensure that no water
gets inside the device!
Maintenance
The device does not require any maintenance.
Storage
• Store the device and its accessories in a dark,
dry and frost-free place out of the reach of
children.
• The optimum storage temperature is between
+5 and +30°C.
• Store the cordless screwdriver in the storage
case supplied.
Charge the battery before storing the device.
Also note the information on storing batteries
in "Information on safe battery usage".
12
12
c)
Disconnect the plug from the power
source and/or remove the rechargeable
battery before making any adjustments,
T
changing accessories, or storing power
r
tools. Such preventive safety measures
f
reduce the risk of starting power tools
R
accidentally.
h
Store power tools out of the reach of
d)
D
children when not in use and do not allow
w
persons unfamiliar with the power tool or
lo
these instructions to operate the power
b
tool. Power tools are dangerous in the
hands of untrained users.
e)
Maintain power tools. Make sure that
none of the moving parts are misaligned
or damaged, that no parts are broken and
that there are no other conditions that
could affect a power tool's operation. If
damaged, have the power tool repaired
before use. Many accidents are due to badly
maintained power tools.
Keep cutting tools sharp and clean.
f)
Properly maintained cutting tools with
sharp cutting edges are less likely to jam
and easier to control.
s
g)
Use the power tool, accessories and
attachments, etc. in accordance with
these instructions while taking into
account the work conditions and the
work to be done. Using power tools in ways
for which they were not intended could
result in hazardous situations
5) Use and maintenance of the rechargeable
power tool
a)
Only charge batteries in battery chargers
that were recommended by the manu-
facturer. If the battery charger is designed
for a certain type of battery, there is a risk
of fire if it is used with different batteries.
b)
Only use the batteries provided in the
power tools. The use of other rechargeable
batteries can result in injuries or fire.
c)
Store the unused battery away from
paperclips, coins, keys, nails, screws or
any other small metallic objects that
could cause bridging between the con-
tacts. A short circuit between the battery
contacts can cause burns or fire.
l
d)
Incorrect use may result in fluid escaping
from the battery. Avoid contact with this
fluid. In case of accidental contact, rinse
with water. If the fluid gets into your
eyes, seek medical assistance.
battery fluid can result in skin irritation or
burns.
6) Service
a)
Have your power tool repaired by quali-
fied experts using only identical replace-
ment parts. This will ensure that the safety
of the power tool is maintained.
7) Information on using the screwdriver
Hold the device by the insulated handle
when carrying out work in areas where the
screw or the insertion tool might encounter
concealed power cables. Contact with a live
cable can also transfer voltage to metal parts
and cause an electric shock.
.
5
5
Leaking
Advertisement
