Download Print this page

Advertisement

Quick Links

Guarantee
We grant a three-year guarantee from the date of purchase.
This product was manufactured using
the latest production techniques and
has undergone thorough quality
control inspection. We guarantee that
the product is in perfect condition.
We will remedy all defects in workman-
ship or materials within the guarantee
period. In order for the guarantee to be
granted, all warranty claims must be
accompanied by proof of purchase
from Tchibo or from an authorised
Tchibo distribution partner.
Product number: EN 301 226
If, contrary to our expectations,
a defect is found, please contact our
customer care service at the following
e-mail address:
service@tchibo.de
Our customer consultants will be
pleased to advise you on further
procedure.
Damage due to improper use, as well
as worn parts and consumables, are
not covered by the guarantee.
Please have the product number at
hand in case of any queries.
This guarantee does not restrict
statutory warranty rights.
16
16
Cordless Screwdriver
Original instructions for use and guarantee
Tchibo GmbH D-22290 Hamburg • 72241AB1X1IV
1

Advertisement

loading

Summary of Contents for Tchibo 301226

  • Page 1 Damage due to improper use, as well accompanied by proof of purchase as worn parts and consumables, are from Tchibo or from an authorised not covered by the guarantee. Tchibo distribution partner. Please have the product number at hand in case of any queries.
  • Page 2: Table Of Contents

    You can use the capacity display to check the battery's charge – so the cordless screwdriver is always ready for operation. We hope you will enjoy using your new cordless screwdriver. Your Tchibo Team Contents About these instructions...
  • Page 3 Technical specifications Model: 301 226 WARNING – Read the instructions for • Unplug the mains adapter from the wall Mains adapter: Input: 230 V ~ 50 Hz use to reduce the risk of injury. socket in the event of a technical fault or –...
  • Page 4: General Safety Warnings For Power Tools

    General safety warnings for power tools Disposal (according to the German Industrial Standard DIN EN 60745-1) WARNING! Read all safety warnings and 3) Personal safety The products, its packaging and the built-in Regular batteries and rechargeable instructions. Failure to follow all safety warnings Stay alert, watch what you are doing and rechargeable battery have been manufactured batteries must not be disposed of along...
  • Page 5 Care / maintenance / storage Disconnect the plug from the power Incorrect use may result in fluid escaping from the battery. Avoid contact with this source and/or remove the rechargeable fluid. In case of accidental contact, rinse battery before making any adjustments, Wipe off dust and similar dirt particles with a DANGER–...
  • Page 6: Information On Safe Battery Usage

    Information on safe battery usage • Despite extensive safety precautions, caution • For safety reasons, the integrated safety Switching on and off Using the bit extension is always required when handling batteries. switch disables the device if it becomes over- To switch on, press the On/Off switch down To ensure safe operation, the following points loaded or overheated.
  • Page 7 First-time use • Do not use any rechargeable batteries that • Protect rechargeable batteries from over- have become distorted or deformed during heating! charging or display other unusual signs Overloading, overcharging or direct sunlight Unpacking 3. Remove the mains adapter from the wall (emitting gas, hissing, cracking etc.).
  • Page 8: Additional Information For Power Tools

    At a glance (package contents) Additional information for power tools Noise and vibration The noise and vibration values were determined in accordance with EN 60745. Magnetic screw holder Bit holder Sound pressure level L pA = 59 dB(A) Light switch Uncertainty K pA = 3 dB LED light...