Miele G 600 Series Installation Instructions Manual page 4

iMPORTANT SAFETY iNSTRUCTiONS
E_ectrica_ safety
Before installation, make sure the
voltage and frequency listed on the
data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubL
To guarantee the electrical safety
of this appliance, continuity must
exist between the appliance and an
effective grounding system.
It is imperative that this basic safety
requirement be met. If there is any
doubt, have the electrical system of the
house checked by a qualified
electrician. The manufacturer cannot be
held responsible for damages caused
by the lack, or inadequacy of, an
effective grounding system
Before installation or service,
i
disconnect the power supply to the
work area by manually "tripping" the
circuit breaker, unplugging the unit, or
removing the fuse.
Do not use an extension cord to
connect the unit to electricity.
Extension cords do not guarantee the
required safety of the appliance, (e.g.
danger of overheating).
ChHd safety
Ensure that any plastic wrapping
bags etc. are disposed of safely
and kept out of the reach of babies and
young children. Danger of suffocation!
,fthe a pp,iance isremoved from i ts
installation and will not be used,
the door to the wash cabinet should be
removed to prevent children from being
locked in the machine.
When discarding an old
' dishwasher, unplug it from the
power outlet, remove the door to the
wash cabinet and cut off the power
cord.