Microtec Bio-1000F Quick Start Manual

Bio-1000F Quick Start Guide
1.
Unpack Contents
Unpack your scanner package and check for major
components.
1. Bio-1000F scanner
2. Power cord
3. Filter Plate
4. Power adapter
5. Hi-Speed USB cable
6. Software CD/DVD
2.
Install Software
Always close any open
programs and turn off
Anti-virus utilities before
installing software.
1. Place the Microtek Software CD/DVD into a
drive, and follow the on-screen instructions
to install the scanner driver and software.
NOTE: If the Microtek Software Installer screen
does not come up automatically, double-click
the following in succession: "My Computer"; the
CD/DVD-ROM icon; then Setup.exe to start the
installer program.
2. Restart your computer at the end of all
software installation.
4.
Connect Scanner
To the power adapter
1. Connect the power adapter to the back of the scanner. Plug one end of the power cord into the
power adapter, and plug the other end of the power cord into a wall outlet or other power source.
To the Hi-Speed USB cable
2. Connect one end of the USB cable to your
computer and connect the other end to the
scanner.
3. Turn the Power switch on the back of the
scanner to "On" and immediate the scanner is
ready to scan.
Copyright © 2017 Microtek International, Inc. http://www.microtek.com
I49-005122 B, March 2017
3
3.
Unlock Scanner
1. With the scanner power off, tilt the scanner
and locate the locking switch at the bottom
right corner of the scanner.
2. Push the locking switch to the position as
indicated in the graphic, with the icon on
the lock showing as "unlocked".
NOTE: To lock the scanner (for shipping and other
reasons), refer to the Bio-1000F User's Manual.
2
2
1
4
5
6
Unlocked Locked
3
1