To Install Another Driver - Visioneer Strobe XP 450 User Manual

120 V S
ISIONEER TROBE
XP 450 S U '
CANNER SER S
T I A
O NSTALL NOTHER
Before you can install another driver for your scanner, you must remove
the currently installed driver first. Then the new driver can be installed.
1. Uninstall the OneTouch 4.0 driver.
a. Open the Windows Control Panel.
b. Double-click the Add or Remove Programs icon.
c. Select OneTouch 4.0 then click on the Remove button.
d. An "Add or Remove" message box opens and asks if you are sure
you want to remove OneTouch 4.0 from your computer. Click
Yes.
The OneTouch 4.0 software is removed from your computer.
2. Unplug the scanner USB cable.
3. Reboot (restart) your computer.
4. Follow the instructions in "Step 2: Install the Software" on page 7
of this User Guide and follow steps for installing one of the other
driver options.
Note: The OneTouch 4.0 driver is required for the Scan button to
function. If you select a driver without OneTouch 4.0, the Scan button
will not initiate scanning.
G
UIDE
D
RIVER