G) Nfc Mode - Renkforce TB230 Operating Instructions Manual

Select one of the following options to disconnect Bluetooth:
• Deactivate Bluetooth on your mobile device. The TV soundbar emits the acoustic message
"Disconnected".
• Switch the soundbar to another audio source (e.g. AUX 1).
• Press and hold the ►II / PAIR button for approx. 3 seconds. The TV soundbar emits the acoustic message
"Pairing".
Music playback via Bluetooth device
The TV soundbar supports the following profiles in Bluetooth mode:
A2DP (Advanced Audio Distribution Profile) – audio playback
AVRCP (Audio Video Remote Control Profile) – music control via remote control of the TV soundbar and
If your mobile device supports AVRCP, you may use the following buttons on the remote control for music
control:
►II / PAIR button
I ◄◄ / ►► I buttons

g) NFC mode

NFC is the abbreviation for Near Field Communication. Please note that NFC only works if your mobile
device is equipped with NFC as well.
• Turn on the TV soundbar.
• Press the SOURCE button (2) repeatedly or the BT button (18)
to activate the Bluetooth mode.
• Activate NFC on your mobile device.
• Place the mobile device on the NFC sensor area; see
adjacent picture. Your mobile device will vibrate or show a
message in the display.
• Start audio playback on your mobile device.
• Remove the mobile device from the NFC sensor area in order
to deactivate NFC on your TV soundbar.
If necessary, remove the cover/protective housing from your mobile device during NFC
transmission, in order to ensure a sufficient connection
34
– playback, pause
– skip to previous/next song
audio playback
NFC sensor area