Handling; A) Switching The Device On And Standby Mode; B) Selecting Audio Sources; C) Volume And Mute Settings - Renkforce TB230 Operating Instructions Manual

10. Handling

a) Switching the device on and standby mode

• After connecting the device to the mains, the TV soundbar will activate the standby mode. The standby
indicator lights up red.
• Use the buttons on the device or remote control to operate the TV soundbar. Some functions can only be
controlled with the remote control.
• Press the on/off switch
device back to standby mode.
• If the device does not detect any input signal for approx. 15 minutes, it will automatically switch to
standby mode. The standby indicator lights up red.
• Disconnect the power cable from the mains in order to fully turn off the device.

b) Selecting audio sources

Press the SOURCE (2) button repeatedly or press one of the audio source buttons (18) to select the desired
audio source.
The LEDs of the selected mode light up as followed:
AUX 1
AUX 2
BT (Bluetooth)
OPTICAL

c) Volume and mute settings

• Press the VOL + / VOL– buttons (4, 5, 17) to set the volume.
• To mute the sound, press the MUTE button (20). Press the MUTE button again or the VOL + / VOL– buttons
to turn the sound on again.
• The respective LED indicator flashes quickly while setting the volume.
• When the maximum volume setting has been reached and you continue to press the VOL +, the LED
indicator will flash once. When the minimum volume setting has been reached and you continue to press
VOL –, the LED indicator will flash once.

d) Sound settings

Select a pre-set sound using the MUSIC (music), MOVIE (video) or FLAT (neutral) buttons (23).
We recommend selecting the modes as followed:
MUSIC – Listening to music
MOVIE – Watching movies
– Pre-set deactivated
FLAT
32
(1, 19), to turn on the device. Press the on/off switch
green, steadily
green, flashing
blue, steadily
orange, steadily
again to switch the