sauter TRA 410 Technical Manual page 14

14/19
TRA 410 TRA 421 Symbol
P P
P P
TRA 410 TRA 421 Symbol
P
P
P
P
P
P
P P
P
Procedure
Press to confirm the selection.
The operation is locked. The standard display is shown.
Press the button for 5 seconds to unlock the operation.
A security code for the locking can be entered for TRA
421 - see parameters 030 and 031.
Press to confirm the selection.
The menu is closed.
Note: Returns to the basic level if no setting is made
for 30 seconds.
Procedure
Set the comfort temperature in the normal heating
mode.
Factory setting: 21 °C
Press to confirm the selection.
Turn to set the setpoint temperature that you want.
Press to confirm the entry.
Set the setback temperature in the "Heating" ECO
mode.
Factory setting: 19 °C
Press to confirm the selection.
Turn to set the setpoint temperature that you want.
Press to confirm the entry.
Set the comfort temperature in the normal cooling
mode.
Factory setting: 21 °C
Press to confirm the selection.
Turn to set the setpoint temperature that you want.
Press to confirm the entry.
Set the setback temperature in the "Cooling" ECO
mode.
Factory setting: 23 °C
Press to confirm the selection.
Turn to set the setpoint temperature that you want.
Press to confirm the entry.
Set the min. floor temperature when a sensor is con-
nected and parameterised (parameter 040).
Factory setting: 3.0 = approx. 22 °C
Press to confirm the selection.
Turn to set to a value between 1 and 6.
1.0 = 18 °C and 6.0 = 28 °C.
Press to confirm the entry.
Note: This setting option is only displayed if the pa-
rameter for the floor sensor P040 is activated. This is
a comfort temperature. As soon as the floor temper-
ature has been reached, the internal sensor takes
over controlling the room.
Set the temperature for the absence function.
Factory setting: 16 °C
Press to confirm the selection.
Turn to set the temperature that you want.
Press to confirm the entry.
Set the minimum and maximum temperature limit.
Factory setting: Min. 5 °C and max. 30 °C
Press to confirm the selection.
Turn to set the minimum/maximum temperature.
Press to confirm the entry.
Set the time and the weekdays.
Turn to set the hours, minutes and day. Press to con-
firm each entry. In the case of a power failure, the
time and weekday settings are stored for approx. 10
hours.
TRA 410, 421
Description of operation
P100015830 B