Siemens Gigaset SE361 WLAN Quick Start Manual page 20

Quick Start Guide
If the correct SSID has been entered in your PC's wireless network adapter, the wire-
less link will be established automatically as soon as you connect your Gigaset SE361
WLAN to the mains power supply (see page 21).
Wired
ì
Connect one of the yellow LAN ports (LAN1 – LAN4) at the rear of the Gigaset
SE361 WLAN to the Ethernet connection on a PC. To do this, use an Ethernet
cable with RJ-45 jacks (CAT5). You can also use the yellow Ethernet cable sup-
plied with the device.
ì
Make sure that the corresponding LAN LED on the front of your Gigaset SE361
WLAN flashes, once the device is switched on.
ì
Reboot the newly connected PC.
20