Subscribe to Our Youtube Channel
Related Manuals for Align-Pilates A2RII Reformer
Summary of Contents for Align-Pilates A2RII Reformer
- Page 1 A2RII with standard Legs and optional Sitting Box A2RII Reformer Assembly Guide & User Manual V5 A2RII Sep 2017 from SN#:A2RII17AUG000151~AUG000370...
- Page 2 Unpacking the Reformer Note: the A2RII reformer weighs over 70Kg so at least two people are required to unpack the equipment. At all times you are responsible for your own safety. Please unpack the equipment in a clear, clean & dry...
- Page 3 Remove all strapping using a safety knife and remove the carton lid. The reformer will be wrapped in a plastic wrapper and protected by polystyrene blocks, carefully cut the plastic wrapper open and inside the carton you will find 3 boxes containing the platform extender and the shoulder rests with ropes and tools and bolts.
- Page 4 Attaching the Rope Risers Once the rope risers are bolted on, slide on the rope pulley holders (Fig. 7) on to each rope riser. Note: if using a Half Cadillac the rope pulley holder can be installed on to Half Cadillac frame as an alternative to installing on the rope riser.
- Page 5 Fig. 15 Fig. 14 Foot Strap installation: 1) Separate the strap in to 2 parts. Taking one half of the strap, thread the nylon loop through the eyelet on the re- former frame under the jump board (Fig. 16) 2) Now pass the foot strap through the loop and pull tight (Fig. 17) 3) Repeat this process for the other half of the strap (Fig.
- Page 6 Check the reformer is level It is important to check your reformer is level to ensure it runs smoothly, particularly where the floor is not perfectly flat. Once you have positioned your reformer in the location where you intend to use it, place a spirit level on each runner to check it is horizontal.
- Page 7 2. Adjusting & Locking the foot bar The foot bar can be positioned in 6 different positions, including flat so it is out of the way. Different positions suit different exercises and user heights. The foot bar can also be locked in any of the positions (except flat) by locating the locking pin in the locking pin hole (see Fig.
- Page 8 - check all nuts and bolts are tight, including those on the Silent rope pulley wheels and those securing the head rest. 2. Troubleshooting Smooth Running of your A2RII Reformer If you reformer is not running smoothly and quietly please follow these step in order to get it back up and running smoothly: 1.
- Page 9 8) Use equipment only for recognised Pilates repertoire. 9) Stop exercising if you experience chest pain, feel faint, have difficulty breathing or experience musculoskeletal discomfort. 10) Keep clothing, body and hair free from all moving parts. 11) Do not use if the equipment appears worn, broken or damaged. Do not attempt to repair equipment yourself. Ensure equipment that is out of service cannot be used.
- Page 10 Exploded diagrams: Note: For larger images of the exploded diagrams and a detailed parts list please download from: https://www.mad-hq.com/align-pilates-resources...
-
Page 11: Optional Extras
The legs on the A2RII are interchangeable so if you move Studio or want to change the usage of your A2RII Reformer you can order higher or lower legs to change your reformer. The change is easy and only requires an allen key. -
Page 12: Warranty Information
Align-Pilates (or their appointed Distributor). The customer is re- sponsible for the cost of return freight to them in the event Align-Pilates decline to make a warranty adjust- ment. Align-Pilates do not accept responsibility for any items returned without a pre-approved authoriza- tion number, which must be clearly marked on the outside of the package.
Need help?
Do you have a question about the A2RII Reformer and is the answer not in the manual?
Questions and answers