Advertisement
Quick Links
M8-Pro Reformer
Assembly Instructions
& User Manual
Note: To check for the latest version of this manual please visit:
https://align-pilates.com/pilates-equipment-resources/assembly-user-guides/
For Patents & Patents Pending see www.Align-Pilates.com/Patents-&-IP
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Align-Pilates M8-Pro Reformer
Summary of Contents for Align-Pilates M8-Pro Reformer
- Page 1 M8-Pro Reformer Assembly Instructions & User Manual Note: To check for the latest version of this manual please visit: https://align-pilates.com/pilates-equipment-resources/assembly-user-guides/ For Patents & Patents Pending see www.Align-Pilates.com/Patents-&-IP...
- Page 2 This manual will show you how to assemble your M8-Pro reformer and then how to adjust it in use. Please ensure you read it fully before unpacking and assembling the equipment.
- Page 3 d. On the reformer, cut the cable ties, which hold the chrome foot bar selector rod in place and remove the protective bag (Fig.3). Note: Box 2 contains the standing platform which we will return to later. Foot bar Axles Fig.3 e.
- Page 4 2. Unpacking the second outer box: a. Carefully take off the lid of the carriage bed box and remove the bubble wrap - do not use a knife as you may cut the vinyl - (you will notice there is a second box, please remove and put aside for use later in assembly) see Fig.12.
- Page 5 e. Attach the maple rope risers using 8 of the M8 x 65mm bolts located in the bolt pack (from the carriage box). The bolts are inserted from the outside of the frame with the larger washer on the outside and small washer on the inside.
- Page 6 Next, thread the end of the rope through the silent pulley from above and then slide the end through the T-Bar rope adjuster, under the carriage, you will need to pull down the locking handle to allow the rope end [to pass through (Fig.23).
- Page 7 M8-Pro User Guide...
- Page 8 & reattaching the springs. Important - The RC spring bar must always be moved with at least one spring attached. Visit the Align-Pilates YouTube channel for a video on ad- justing the RC spring bar. 5) Adjusting the head rest The head rest has 3 positions including flat.
-
Page 9: Optional Extras
The M8-Pro Reformer has a complete range of optional accessories including: Half Cadillac with bracket, Mat Converter, Jump Board and Platform extender. All M8-Pro accessories are interchangeable with the preceding M2-Pro accessories For the complete range of Align-Pilates apparatus & a complete range of Pilates mat work accessories please visit www.Align-Pilates.com. Jump Board... - Page 10 Below follows a basic maintenance guide though our detailed maintenance guide and a sample maintenance log can be downloaded from https://www. align-pilates.com/pilates-equipment-resources/assembly-user-guides/ • Springs - Inspect for signs of wear, look for deformation, kinks, gaps and corrosion. Springs showing signs of damage must not be used and must be replaced immediately.
- Page 11 Do not exceed the maximum user weight for the equipment which is 150kg. Congratulations! You are now ready to use your M8-Pro Reformer. Now would be a good time to make a note to replace your springs in 2 years or, within 3,000 hours of use, whichever is sooner. We hope you enjoy using your new...
-
Page 12: Warranty Information
6) Upholstery The upholstery fabric on Align-Pilates equipment will be replaced if it fails to give normal wear for 90 days from the date of delivery. Proof of damage may be required. This warranty does not cover cuts, scratches, burns, stains, soiling, or damages caused by unreasonable use such as wearing jewellery or inappropriate clothing whilst using the equipment.
Need help?
Do you have a question about the M8-Pro Reformer and is the answer not in the manual?
Questions and answers