Download Print this page
SVS SB-2000 PRO Quick Start Manual

SVS SB-2000 PRO Quick Start Manual

Hide thumbs Also See for SB-2000 PRO:

Advertisement

Quick Links

4
Get Control
Your SVS SB-2000 PRO Subwoofer can be controlled from the new SVS Mobile
App or via the rear panel for maximum flexibility when optimizing performance
based on your room layout, speakers, system set-up and more.
Download The App
The SVS App is the easiest and most convenient
way to access all of the advanced control features
available on your SB-2000 PRO, from the comfort
of your favorite seat.
For iOS & Android Devices
On The Subwoofer
The rear panel features an intuitive all-new user interface with controls for adjusting the subwoof-
er's primary settings. The blue LED bar shows settings for Volume, Low Pass Frequency, and Phase.
Simply press the setting you want to change and then use the "+" and "-" buttons to adjust the
settings.
SVS SOUNDPATH WIRELESS
+
AUDIO ADAPTER
30Hz
40Hz
60Hz
90Hz
LINE LEVEL
90°
_
L
R
VOL
5
LFE
Please note, some DSP settings can only be accessed using the SVS app.
TRIGGER INPUT
Get Calibrated
3V-12V | AC/DC
For connection to an AV Receiver, set the SB-2000 PRO volume to -10 in the app (on
the rear panel, all but the last two lights illuminated). Set the low pass filter to LFE
and the phase to 0 degrees, then run auto-set-up on the AV Receiver. Always re-run
set-up if you move the subwoofer to another location.
For connection to a Stereo Receiver or Preamplifier
AUTO EQ - START
without auto-set-up, adjust the SB-2000 PRO volume
to match the output of your main speakers, and
MIC INPUT
adjust the low pass filter to blend the bass between
the SB-2000 PRO and your speakers.
consult with our Sound Experts on the best phase
setting.
For additional guidance on recommended crossover or low pass filter settings specific to your system,
visit our Subwoofer Matching Tool at www.svsound.com/merlin, or just call, email or chat online with
100V-120V ~ 50-60Hz 800W
our Sound Experts: (877) 626-5623 | custservice@svsound.com | www.svsound.com
PARAMETRIC EQ
HOME / VOLUME
-22
PEQ1
PEQ2
PEQ3
ACTIVE
ACTIVE
DISABLED
0
20
40
50
100
200
6
4
2
0
-2
-4
-6
-8
-10
PRESET
MOVIE
-12
FREQ:
200
Hz
OPTIONS
LOW PASS FILTER
BOOST:
0
dB
Q FACTOR:
1.2
UP (+)
AUTO / ON
LOW
LOW PASS FREQUENCY
PASS
140Hz
LFE
LOW PASS
180°
PHASE
PHASE
PHASE
VOLUME
DOWN (-)
S T A - 8 0 0 D | 2
If needed,
Quick Start Guide
SB-2000 PRO
Congratulations on choosing the SVS SB-2000 PRO, one of the most powerful and advanced
subwoofers in the world. We know you're anxious to get it cranking so the following steps will
guide you through the quick and easy installation process.
We strongly recommend reading the SB-2000 PRO Owner's Manual to get the best possible
performance out of your new subwoofer. You'll find useful information about subwoofer
1
placement, connections, DSP functions and more. The full SVS SB-2000 PRO Owner's Manual can
be found here: www.svsound.com/sb-2000pro-manual
Unbox It
If you followed the SB-2000 PRO Subwoofer unboxing instructions properly
you will have the following items in front of you. Please confirm all pieces are
available before continuing.
[SB-2000 PRO Subwoofer]
[Detachable Power Cord]
[Removable Grille]

Advertisement

loading

Summary of Contents for SVS SB-2000 PRO

  • Page 1 S T A - 8 0 0 D | 2 For connection to an AV Receiver, set the SB-2000 PRO volume to -10 in the app (on the rear panel, all but the last two lights illuminated). Set the low pass filter to LFE...
  • Page 2 Hook It Up For most set-ups, a single RCA subwoofer interconnect cable running from the AV Receiver’s “SUB 1” output to the SB-2000 PRO’s “LFE” line level input is all that’s required to connect the subwoofer into your system. If you run separate Preamplifier and Power Amplifiers, follow the “Line Level Connection –...
  • Page 3 2000 PRO SAFETY INSTRUCTIONS SUBWOOFER • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instruc - tions.
  • Page 4 2000 PRO FCC & IC COMPLIANCE SUBWOOFER FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two condi- tions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.