Page 1
Instruction Manual | 012-16830A //code.Node Holder PS-3233 Product Description The //code.Node Holder is an accessory for the //code.Node (PS-3231). The Holder is used to mount the //code.Node to a variety of surfaces. What's Included //code.Node Holder with Strap Hook Fastener Strip Use the strap on the Holder to mount a Attaches to the loop fastener strip on //code.Node to a variety of objects.
Page 2
//code.Node Holder | PS-3233 //code.Node Holder Features Strap Slots Release Tab For inserting the included hook and For securing the //code.Node to the loop strap. Holder. Pull gently to release the //code.Node from the Holder. Fastener Hole Loop Fastener Strip (not shown) Use to insert a fastener (such as a screw) for a permanent mounting The strip is located on the back of the...
Page 3
Instruction Manual | 012-16830A Install the //code.Node into the Holder 1. Insert the top side of the //code.Node into the Holder face up. 2. Press down the bottom side of the //code.Node until it snaps in place. To release the //code.Node from the holder, gently pull back the release tab then pull the //code.Node out of the Holder.
Page 4
Warranty, Copyright, and Trademarks Limited Warranty For a description of the product warranty, see the Warranty and Returns page at www.pasco.com/legal. Copyright This document is copyrighted with all rights reserved. Permission is granted to non-profit educational institutions for reproduction of any part of this manual, providing the reproductions are used only in their laboratories and classrooms, and are not sold for profit.
Need help?
Do you have a question about the //code.Node Holder and is the answer not in the manual?
Questions and answers