Advertisement
Quick Links
Force Platform Structures Bracket
Brackets
Introduction
The PASCO model ME-6988A Force Platform Structures
Bracket includes two brackets and four thumbscrews. The
adapter bracket is designed to connect members of the PASCO
Structures System to a PASCO Force Platform.
Force Platform
PASPORT 1-Axis
PASPORT 2-Axis
ScienceWorkshop 1-Axis
Recommended Equipment
PASCO Structures System
800-772-8700
®
Attachment
positions
Model Number
PS-2141
PS-2142
CI-6461
Model Number
see www.pasco.com
ME-6988A
Storage hole
Each Force Platform Structures Bracket has six positions where
members of a PASCO Structure System can be attached, and two
thumbscrews for attaching the bracket to a Force Platform. Note
that each bracket also has two threaded holes for storing the
thumbscrews when they are not in use.
Examples of the PASCO Structures System include:
Truss Set (ME-6990) - A small set for building trusses
Bridge Set (ME-6991) - A larger set with road bed and
cables for building bridges and roller coasters
Advanced Set (ME-6992A) - The largest set with pulleys,
axles, and additional connectors that make possible bridges
which have angles other than 45 and 90 degrees. This set can
also be used to build suspension bridges, cranes, cars and
catapults.
Instruction Sheet
012-12312A
*012-12312*
Storage hole
Thumbscrews
www.pasco.com
Advertisement
Related Manuals for PASCO ME-6988A
Summary of Contents for PASCO ME-6988A
- Page 1 Brackets Each Force Platform Structures Bracket has six positions where Introduction members of a PASCO Structure System can be attached, and two thumbscrews for attaching the bracket to a Force Platform. Note The PASCO model ME-6988A Force Platform Structures that each bracket also has two threaded holes for storing the Bracket includes two brackets and four thumbscrews.
- Page 2 Structures Bracket attachment position (4) Use two thumbscrews to mount a bracket to one side of a PASCO Force Platform. Note that two brackets will fit on one Force Plat- form. Use Truss Set thumbscrews (ME-6994) from one of the PASCO Structures Systems sets to attach I-beams or other members of a structure set to the six attachment positions on the bracket.
-
Page 3: Technical Support
#4 I-beam and a separation of a #5 the top attachment position on a “half-round” connector (part of I-beam if the Brackets are mounted on a PASCO Force Platform. the ME-6990 Truss Set). However, if the Brackets are mounted on another platform, or no...
Need help?
Do you have a question about the ME-6988A and is the answer not in the manual?
Questions and answers