VIPowER VPA-3528Net User Manual page 8

ViPowER / VPA-3528Net User`s Manual
Installation
Proceed with the following steps to install the VPA-3528Net hardware.
Step 1.
Remove two retaining screws on the rear panel securing the Rear Panel and
Body Case (Body Case including Body Outer Cover and Inner Cradle with
PCB and Front Cover).
Step 2.
Carefully slide the Inner Cradle with PCB and Front Cover off the Body Outer
Cover with Rear Panel.
ViPowER /
8
3.5-inch Aluminum HDD NetWork Storage