Disk Utility Segment - VIPowER VPA-3528Net User Manual

ViPowER / VPA-3528Net User`s Manual

5-6. Disk Utility Segment

Click on [Disk Utility] shown on the LEFT side of the GUI setup window to
enter into the window below.
If your HDD is an unformatted new drive, you need to format the drive via this
utility. Please note that VPA-3528Net NetWork Storage only support FAT32
Format.
1. Press Format button to start formatting your HDD.
Warning:
All your data and partitions will be deleted if the format button is
pressed.
If the file size of the new HDD is zero and the drive could not be
found, you have to utilize the Disk Utility to format the HDD as FAT32
format.
2. After the HDD is formatted, please reboot your VPA-3528Net NetWork
Storage and click Refresh button to refresh the IE.
3. Running the Scan Disk program will check the file system. And correct
any errors found. This Program should be run regularly. Press the Start
button, and the results will show on the column. If you want to delete the
error messages, please click on the messages and press Delete Error
Msg button.
32
ViPowER /
3.5-inch Aluminum HDD NetWork Storage