Table of Contents
Advertisement
7. Locate the IDE port and power port situated on the rear face of the hard drive.
Plug the IDE cable and power cable into the appropriate port ensuring that
they fit securely.
8. Position the cradle/hard drive onto the Enclosure base unit.
9. Secure the cradle with the four retaining screws.
10
IDE PORT
POWER PORT
RED LINE
4 3 2 1
IDE CABLE
POWER CABLE
VP-9258V Installation Guide
Line List
Line colour
Role
1
Yellow
+12V
2
Black
Earth
3
Black
Earth
4
Red
+5V
Advertisement
Table of Contents
