Table of Contents
Advertisement
Available languages
Available languages
5
Operation
This appliance is intended for steaming fresh solid ingredients and then blending them to obtain baby food. Normally
you would first steam the ingredients and then blend them. However, you can also use the appliance for steaming or
blending only. When you use the appliance for blending only, skip the sections 'Filling the tank with water' and
"Steaming' and only follow the instructions in section "Blending'.
Note: After blending, never steam already blended food.
Never steam the same batch of ingredients for longer than 20 minutes or more than once.
WARNING
•
Always check the temperature of the baby food before you feed your baby.
•
Always make sure that the lid has cooled down after steaming before you open it to add more
ingredients for blending.
•
Empty the water tank before you refill it to start a new steaming process.
•
Do not exceed the maximum level indicated on the blender bowl when blending food.
•
Do not exceed the maximum level indicated on the blender bowl when blending liquids.
5.1
Steaming
5.1.1 Filling the tank with water
Remove the steamer basket
Note: It is advisable not to use mineral water, as the minerals contained in this type of water cause scale to build up
inside the tank.
Note: Do not place anything other than water in the water tank.
5.1.2 Steaming
•
Position the unit on a flat surface.
•
Insert the power cord into a standard domestic power outlet and switch on.
•
Remove the steamer basket
exceeded.
•
Place the steamer basket
•
Cut solid ingredients into small pieces (cubes not bigger than 2-3cm).
•
Place the ingredients in the steamer basket
•
Place the lid
on the steamer basket.
12
•
Turn the control switch
appliance is steaming.
•
When the food has steamed, turn the control switch
the lid
to ensure no more steam releases from the steam outlet.
12
•
Test the food to make sure it is at a safe temperature for your baby.
Note: Do not process a large quantity of solid ingredients at the same time. Process these ingredients in a
series of small batches instead.
5.2
Auto Cut-Out Reset
This appliance is equipped with an overheat protection. It will cut off the power automatically if the water is heating dry.
The steam indicator will go out at the same time.
To start your next steaming process, wait for the appliance to cool down and turn the control switch
position
.
a
Reset
5.3
Ingredients and their steaming time
All food has to be cut in small cubes, no bigger than 2-3cm.
Type of food
Fruit
TOPCOM Baby Blend & Cook
from the tank
. Fill with water, ensuring the maximum level is not exceeded.
9
11
from the water tank
11
onto the water tank
11
.
11
to the steaming position
8
Ingredients
Apple, Orange, Peach, Pear, Plum
Pineapple
. Fill with water, ensuring the maximum level is not
9
and turn to the "lock" position.
9
. The steaming indicator
to the "off"
position. Wait 2 minutes before removing
8
TOPCOM Baby Blend & Cook
will light up to indicate that the
7
to the reset
8
Approximate
steaming time
10 minutes
15 minutes
7
Advertisement
Table of Contents
