Lubricate The Wheel Bearings; Engine Maintenance; Servicing The Air Cleaner - Toro BC-25 Operator's Manual

Lubricate the Wheel Bearings

Service Interval: Every 500 hours
Lubricate the wheel bearings with several pumps of No. 2
general purpose lithium base grease (Figure 17).
Figure 17
1. Grease zerk

Engine Maintenance

Servicing the Air Cleaner

Removing the Air Filter
1. Unscrew the knob and remove the air cleaner cover
(Figure 18).
G016621
1. Knob
2. Air cleaner cover
3. Cover nut
4. Spacer
5. Cover
2. Carefully slide the foam pre-filter off of the paper
element.
3. Unscrew the cover nut and remove the cover, spacer
and paper filter.
Cleaning the Foam Pre-Filter
Service Interval: Every 25 hours
1. Clean around the air cleaner to prevent dirt from
getting into the engine and causing damage.
2. Remove the foam pre-filter; See
Removing the Air Filter (page 16).
16
Figure 18
6. Foam pre-filter
7. Paper filter
8. Rubber seal
9. Air cleaner base