Water Outlets - Set The Default Outlet - Kohler K-527 User Manual

Press and hold both icons
for 2 seconds.
+
Water Outlets – Set the Default Outlet
This setting determines which outlet(s) will default on when at shower start-up.
Factory default for this setting is outlet 1 (1).
Press and hold the [Power Icon] and the [Up Icon] to enter the settings menu. If your shower is on,
the water will be shut off.
Use the [Up Icon] or [Down Icon], to step to the "Prog 9" screen. Press the [Power Icon].
NOTE: For K-527 only: Both outlets must be enabled (Prog 8) for "b" to show up as an option. See the
"Water Outlets – Enable Both or Toggle" section.
NOTE: Both outlets (b) is only an option for K-527.
Use the [Up Icon] or [Down Icon] to choose the outlet(s) that will be on at shower start-up; "1" for
outlet 1 to be the default, "2" for outlet 2, or "b" for both outlets (K-527 only). Press the [Power Icon]
to set.
Press the [Power Icon] again to return to the settings menu.
Continue Set-up: Use the [Up Icon] or [Down Icon], to choose the next desired setting; press the
[Power Icon] to select. See the section for the chosen setting.
To Exit the Settings Menu: Use the [Up Icon] or [Down Icon], to step to the "Prog En" screen and
press the [Power Icon]. The system will go into standby mode.
1144502-5-D
Choose default outlets: outlet 1
(1), outlet 2 (2), or both (b).
16 Kohler Co.