Advertisement
6 Turn on the main board or the TV set , click the connect picture, link target board.
Chart（3、4）
6.1 If link successfully, then display the dialog as follow ,please click "OK" ,and continue
Chart（5）
6.2 If link unsuccessfully, then display the dialog as follow ,please click "OK", and check the related operation
Chart（6）
6.2.1 1 please check if the link on the tooling is normal ,including the USB ISP installation right or not .
6.2.2 please confirm the main board or the TV SET if all have been connected with the adapter ,and being in boot state .
6.2.3 After checking and revising ,please click the "connect "again, and link .
6.3 After checking and revising ,please click the "connect" again ,and link .
Chart（7）
24
Advertisement
