Advertisement
Table of Contents
1.0 SCOPE
Fiber optic cross connect cabinet is an outdoor optical equipment that is especially designed for outdoor
optical nodes in access network.
2.0 PROCEDURE
ENGINEERING RECORD
NO : 637979
MPN/FMT-042 (2019/DEC/23 REV-03).
THIS INFORMATION IS CORRECT AS AT THE TIME OF PUBLICATION, SPECIFICATION ARE SUBJECT TO CHANGE
INSTALLATION INSTRUCTIONS
FIBER OPTIC CROSS CONNECTION CABINET 144, 288 AND 576 FIBER.
Open the cabinet base cover, fix the cabinet on the Cement base. (Fig 1)
SAP NO : 187000544
Doc No: 187000544 Doc part: AS
http://www.molexces.com/
BEFORE INSTALLING OR ADJUSTING THIS PRODUCT,
PLEASE READ THESE INSTRUCTIONS CAREFULLY.
PLEASE KEEP THIS GUIDE FOR FUTURE REFERENCE
REV- A
SHEET No. 1 of 3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for molex 144 FIBER
Summary of Contents for molex 144 FIBER
- Page 1 BEFORE INSTALLING OR ADJUSTING THIS PRODUCT, INSTALLATION INSTRUCTIONS PLEASE READ THESE INSTRUCTIONS CAREFULLY. PLEASE KEEP THIS GUIDE FOR FUTURE REFERENCE FIBER OPTIC CROSS CONNECTION CABINET 144, 288 AND 576 FIBER. 1.0 SCOPE Fiber optic cross connect cabinet is an outdoor optical equipment that is especially designed for outdoor optical nodes in access network.
- Page 2 Fig 1 Put the fiber optic cable entry cabinet through the base holes, strip out the fiber cable, fix the cable by cable clamps, fix cable strengthen core by cable fixing strengthen member kit. Put the stripped-out fiber into transparent tube, then put them into each fiber optic splice tray units;...
- Page 3 Connect the adapter of this tray to another tray by fiber optic patch cord, when finish all connection, close the cabinet door. 3.0 CAUTION: Molex recommends wearing safety glasses When cutting fiber optic cable. WARNING: 1. Never stare into the open fiber core side. Laser light may be present and is invisible. Serious eye damage is possible.
Need help?
Do you have a question about the 144 FIBER and is the answer not in the manual?
Questions and answers