Next CARTER 117994 Assembly Instructions

IMPORTANT - KEEP FOR FUTURE
REFERENCE READ CAREFULLY

Tools Needed

Helpline

If you have any problems with this product or require any
replacement fittings please contact Customer Services Tel: 0844
844 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty.
Should you need to return the unassembled product, please repack in the original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions.
• Carefully check that you have all parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from the construction area.
• We recommend that the packaging is used to protect the surfaces during assembly.
• A minimum of two persons is required to assemble this product.
• Assemble this product close to the required position in the room to reduce handling.
• All assembly fitting should be tightened properly before use and should be periodiacally checked and re-tightended if required.
• Children are likely to play,bounce jump and climb on beds,therefore the child's bed should not be place too close to other furnture
• WARNIMG: Be aware of the rish of open fire and other sources of strong heat,such as electric bar fires,etc.In near vicinity of the bed
• WARNING: Do not place this child's bed near heat sources,windows and other furniture
• WARNING: Do not use child's bed neat if any part is broken ,torn or missing and use only spare parts approved by the manufacture
• WARNING: Not suitable for children under 4 years.

PRODUCT INFORMATION

• Made from MDF & particle board with a wood effect finish paper.
• A mattress measuring 900mm x 1900mm is intended for use with this item
• Made in China.

CARE INSTRUCTIONS

• For general cleaning, periodically dust with a soft cloth.
• Do not rub or scrub the surface when cleaning.
• Do not use furniture polish.
• Any spills should be removed immediately with a soft clean damp cloth and dried immediately.
• Ensure the product is protected with mats and coasters when items are placed on the surfaces, to prevent scratching or damage.
• Do not put hot dishes directly on the surfaces of the item.
• Avoid keeping furniture in direct sunlight or close to any heat sources as this can cause cracking, discolouration or warping.
• Never drag pieces of furniture across the floor as this will cause damage to the joints.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if necessary.
• Do not cover your bed straight away-allow it to air thoroughly for a few hours.
• Sprung slates are designed to be positioned with the curve
• The child's bde conforms to BS 8509:2008+A1:2011
•The bed is not designed to be dismantled for storage or transportation.
117994 CARTER BED
ASSEMBLY INSTRUCTIONS.
not
︵ ︵ ︵ ︵ ︶ ︶ ︶ ︶
Page 1 of 4
.Incorrect use may cause damage to the bedstead.