1. NO BOOTING WHEN YOU TURN THE UNIT ON
When you plug power cord and turn the unit on, LED light won't turn red, the unit won't
read disc nornally.
1-1. Please check every output voltage.
1) Please check if output voltage 3.3 V from main board Q4 C polarity is normal.
If output voltage 3.3 V is not normal, please check the working status of SMPS board.
2) Please check if output voltage 5 V from main board XP9 pin11 is normal.
If output voltage 5 V is not normal, please check the working status of SMPS board.
3) Please check if output voltage 1.2 V from main board Q5 C polarity is normal.
If output voltage 1.2 V is not normal, please check the working status of main board Q5.
XP9
ONE POINT REPAIR GUIDE
Q5
< Main Board Top View >
Q4
3-2