Table of Contents
Advertisement
Quick Links
Included Equipment
1
Wireless AC/DC Module
2
Micro USB cable
For connecting the accessory to a USB charger
or port.
800-772-8700
Wireless AC/DC Module
EM-3533
Required Equipment
The following table lists the equipment required to
perform experiments with the device. Only one of the
options provided for each item is required.
Item
Options
Modular
EM-3535 Basic Kit
Circuits Set
EM-3536 Essential Physics Kit
EM-3556 Advanced Expansion Kit
EM-3540 Expansion Kit
Software
PASCO Capstone
SPARKvue
Product Manual
012-16455A
www.pasco.com
Advertisement
Table of Contents
Related Manuals for PASCO EM-3533
Summary of Contents for PASCO EM-3533
- Page 1 Product Manual 012-16455A Wireless AC/DC Module EM-3533 Included Equipment Required Equipment The following table lists the equipment required to Wireless AC/DC Module perform experiments with the device. Only one of the options provided for each item is required. Micro USB cable...
- Page 2 USB charger or port. 1. Charge the battery. 2. Allow the battery to charge for at least three 2. Update your PASCO data collection software. hours. The battery status LED will turn green when fully charged. 3. Update the firmware.
- Page 3 The Wireless AC/DC Module output voltage is controlled Go to Help and select Check for Updates. from the signal generator panel in PASCO Capstone and SPARKvue. The signal generator panel provides controls for the waveform, frequency, and amplitude of the output voltage.
- Page 4 Battery Rechargeable Lithium- Trademarks PASCO and PASCO scientific are trademarks or Polymer 1000 mA registered trademarks of PASCO scientific, in the United States Protection Overcurrent, and/or in other countries. All other brands, products, or service Overtemperature, Back EMF names are or may be trademarks or service marks of, and are used to identify, products or services of, their respective owners.
Need help?
Do you have a question about the EM-3533 and is the answer not in the manual?
Questions and answers