Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for dadada SOHO DRESSER
Summary of Contents for dadada SOHO DRESSER
- Page 1 SOHO DRESSER...
- Page 2 Soho Dresser - Assembly Instruction • Thank you for purchasing our product. Please follow these assembly instructions as it will save you time, make assembly easier and prevent possible damage to your new furniture item. • We strongly recommend that this unit is assembled on a soft surface such as carpet or blanket.
- Page 3 Before you start to assemble, we highly recommend Your watching our assembly instructions video or go to our website: dadadababy.com first dresser...
-
Page 4: Part List
Part List ×4 ×4 ×4 2-11/64’’ ∅8×55 ×6 ×1 2’’ M8*50 ×1 ×1 Extra fittings: +1 Extra +1 Extra +1 Extra +2 Extra... -
Page 5: Tools Requirements
Anti-Tipping Kit ×4 ×4 ×4 5/8’’ 1-33/64’’ 1-9/16’’ ∅4×16 ∅7×38 ∅4×40 ×4 ×2 Tools Requirements Images for illustration only... - Page 6 • Open the box from the bottom, take out the foam and legs. ×4 ×4 ×4...
- Page 7 ×4 ×4 ×4 ×1 ×6...
- Page 9 How to take out or reassemble the drawer ? Follow the appropriate pictogram, pull inwards the bracket under the drawer to release the drawer interlock system. Lift up the drawer and take it out carefully. Put the drawer at the appropriate position, make sure the hole under the drawer side is properly stuck at the slide.
- Page 10 Furniture Anti-Tipping Kit Installation WARNING Children have died from furniture tipover. To reduce the risk of furniture tipover: • ALWAYS install tipover restraint provided. • NEVER put a TV on this product. • NEVER allow children to stand, climb or hang on drawers, doors, or shelves.
- Page 11 Anti-Tipping Kit ×4 ×4 ×4 5/8’’ 1-33/64’’ 1-9/16’’ ∅4×16 ∅7×38 ∅4×40 ×4 ×2 Please make sure the screws in the kit fit your wall material. The hardware we provided is only for masonry or drywall without available wood stud. If you have any questions, consult your local hardware store.
- Page 12 • Attach two brackets securely to the back top rail of the furniture using the short screws provided, through the smaller hole. Then at the appropriate height and positioned over wood stud(s), make two marks with a pencil. • Drill four 5/16 inch (8mm) diameter holes through the wall at the height you marked with pencil.
- Page 13 • Drive the plastic plugs into the holes, using a harmer if needed. • Attach two brackets securely to the wall using the long screws provided. • Move the furniture into its final position. • Lace the end of the restraint strap through the larger hole in each mounting bracket.
-
Page 14: Care / Cleaning / Maintenance
Care / Cleaning / Maintenance: • A little care attention will extend the life and good looks of your furniture. • This furniture item should not be exposed to direct sunlight, extreme temperature or moistures, as this can result in irreparable damage. •... -
Page 15: Limited Warranty
Limited Warranty: • We guarantee this furniture unit for a period of 1 year from date of purchase. • The warranty covers any products failure which may occur due to manufacturing fault. • However it excludes any part subject to normal wear and tear,any damaged or defective parts that result from installation and assembly, misuse or neglect. -
Page 16: Customer Service
• Copy of your purchase slip/receipt • Model number of the unit purchased • Description/part number of the missing or faulty part • Quantity of the parts needed If you whatever reason can not contact the store, please contact dadada directly: www.dadadababy.com Phone number: +1973848680...